| Name | Brush Master Series 6.5 HP 208cc Chipper Shredder with 2.25 in. Diameter Feeder (not available in Calif.) |
|---|---|
| GTIN | 00891523000697 |
| UPC | 891523000697 |
| SKU | BEASTCH6 |
| OEM | No |
| Series | Brush Master Chipper |
| Brand | Beast |
| Packaging Level | No |
| Height | 34 in. |
| Width | 24 in. |
| Accessories Included | Yes |
| Bag Capacity | N/A |
| Chipper Blade Material | Steel |
| Chipper Capacity | 2.25 in. |
| Engine Make | DEK |
| Engine Oil Inlcuded | Yes |
| Egine Displacement | 208 cc |
| Engine Torque | 8.1 ft-lbs |
| Engine Horsepower | 6.5 hp |
| Maximum RPM | No |
| Start Type | Manual / Recoil |
| Fuel Tank Capacity | 1.27 gal. |
| Fuel Type | Gasoline |
| Tanslucent Fuel Tank | No |
| Recommended Oil | 10W-30 oil (5W-30 is recommended for cold weather climate) |
| Oil Capacity | No |
| Low Oil Shut Down | Yes |
| Power Type | Gas |
| Housing Material | Steel |
| Feed Capacity | 2 x 3 in |
| Self Feeding | Yes |
| Limb Chute | Yes |
| Reduction Ratio | 12:1 |
| Shredded Screen Material | 1/4 in. |
| Tow Bar | No |
| Wheels | Yes |
| Rust Resistant | Yes |
| State/Regional Restrictions | California (NOT CARB COMPLIANT), Alaska, Hawaii, Puerto Rico, Guam, Virgin Islands |
| Country of Origin | China |
| CSA Certified | No |
| ETL Listed | No |
| UL Listed | No |
| Base Warranty for Parts and Labor | New: 24 Months Limited, Scratch and Dent: 24 Months Limited, Recondition: No Warranty |
| Other Component Warranty for Parts and Labor | 24 Months Limited |
| Recommended Safety Equipment | Hearing protection, Gloves, Goggles (eye protection) |
| Instructions / Assembly Required | Yes |
| Package Contents | Hardware bag |
Check items to add to the cart or select all
-
Performed Very Good Review by UKfan
Rating: this unit was easy to assemble, starts very easy, only used once, really like the way it works, can be overloaded if material is not put in at a even rate. takes about 45 min to set up fill with oil and fuel. all parts and wrenches included, execpt for oil. this unit should work well for home owner with light to medium demand. not a heavy duty unit
be sure to sta-bil the fuel if not used every month. (Posted on 3/22/13) -
MAKES QUICK WORK OF YARD WASTE Review by wildcattommy
Rating: This does a great job reducing leaves and brush to mulch. No directions to find the oil fill port - and it is sort of hidden. Takes a man's strength to start the engine - but not many pulls. Runs smooth. Putting leaves into the feed bin takes longer than you might hope because of the shielding against kick-back off the cutting blades - but its for your protection.
Please note: instructions tell you NOT to cut green, non-woody stemmed plants (like tomato vines). Despite this, I cut up green brussels sprouts and found that the resulting wet material adhered to the top of the output shoot. I probably need to inspect the entire insides for adhered gunk - be forewarned!
My primary problem with the device is that the velocity of the mulched material exiting the output shoot is so great that it is impossible to contain that material in a garbage can or bag. So, I must wheel the device to where I want the mulch, bring the material to it, blast the mulch onto the ground and then spread it around. Not so terrible a problem at my scale - but at yours?
In summary, for what I paid, I feel that I am getting a very solid, well-made, effective solution that will serve me for years to come. (Posted on 3/21/13)
Write Your Own Review
You're reviewing: Brush Master Series 6.5 HP 208cc Chipper Shredder with 2.25 in. Diameter Feeder (not available in Calif.)
